SSimder TIG-250AC 6 in 1 AC Pulse TIG Welder
Tax included
Shipping calculated at checkout
Description
The Simder Welder TIG-250 is a 250A 6-in-1 AC/DC TIG welder that welds aluminum with AC Pulse TIG, runs DC TIG for stainless and titanium, handles stick for thick steel, and gives you Synergic one-knob mode for clean first welds. It runs on both 110V and 220V household power, so one machine covers aluminum fabrication, thin-sheet precision, and heavy steel in your garage or shop. The 250A output beats entry TIG machines in this class — most competitors stop at 200A.
At a Glance
| Processes | 6-in-1: AC TIG, AC Pulse TIG, DC TIG, DC Pulse TIG, Stick (MMA), Synergic (one-knob) |
| Max Output | 250A (TIG), 200A (Stick) |
| Voltage | Dual 110V / 220V |
| Aluminum | Yes — AC TIG + AC Pulse TIG |
| Pulse Control | up/down slope, initial/background current, pulse width, frequency, pilot arc current |
| Modes | Synergic (auto) / Manual — 2T / 4T / SPOT |
| Gas Control | Pre-flow / post-flow adjustable |
| Stick Features | Arc Force, Hot Start |
| Included Torch | WP26 TIG torch |
Built For
- Home garage DIY — one machine does AC/DC TIG, pulse, and stick; Synergic mode flattens the learning curve
- Auto body & aluminum — AC Pulse TIG welds aluminum panels and structural plate up to 250A
- Thin metal precision — DC Pulse TIG controls heat on stainless, titanium, and sheet steel
- Pro shops — Manual mode with full pulse parameter control (width, frequency, slope, currents)
- Not for industrial production lines — duty cycle is prosumer grade, not 24/7 factory
Full Specifications
| Model | TIG-250AC |
| Input Voltage | 110V / 220V dual |
| TIG Current Range | Up to 250A |
| Stick Current Range | Up to 200A |
| Welding Processes | AC TIG / AC Pulse TIG / DC TIG / DC Pulse TIG / Stick / Synergic |
| Weldable Metals | Aluminum, ultra-thin stainless, titanium, carbon steel, alloy steel, copper (TIG); thick plate, carbon steel, low-alloy steel, cast iron (Stick) |
| Pulse Parameters | up/down slope, initial current, background current, pulse width, pulse frequency, pilot arc current |
| Modes | 2T / 4T / SPOT with adjustable spot time |
| Gas Control | Pre-flow / post-flow adjustable |
| Stick Features | Arc Force, Hot Start |
| Included Torch | WP26 TIG torch |
How It Compares
| TIG-250 (Simder) | Typical 200A AC/DC TIG | |
| Max TIG output | 250A | 200A |
| Aluminum | Yes — AC TIG + AC Pulse TIG | AC TIG (varies) |
| Synergic one-knob | Yes | Often not |
| Pulse parameter control | Full (width/freq/slope/currents) | Limited or none |
| Spot welding | Yes (adjustable time) | Varies |
| Dual voltage | Yes — 110V/220V | Usually single |
Real-World Use Cases
Welding an aluminum trailer or boat repair?
Use AC Pulse TIG with 250A on tap. The pulsing cleans the oxide layer and controls heat on thin sheet, so you can tack panels in position and lay a clean bead without burn-through.
Stainless steel kitchen or exhaust work?
DC Pulse TIG keeps heat input low and steady — ideal for thin stainless, titanium, and small precision joints where color and distortion matter.
Teaching yourself to weld for the first time?
Start in Synergic one-knob mode — set the amperage, let the machine set the rest. 2T/4T keeps the arc steady while you learn travel speed, then move to Manual as you grow.
In The Box
- TIG-250AC Welder
- WP26 TIG torch
- Electrode Holder & Ground Clamp
- Gas Hose for TIG
- User Manual
TIG-250 Newest Review
Frequently Asked Questions
Is the TIG-250 good for beginners?
Yes. Synergic mode auto-sets parameters, and 2T/4T/SPOT simplify the learning curve. Manual mode gives room to grow into professional Pulse TIG work.
Does it include a TIG torch?
Yes — a WP26 TIG torch is included in the box. A foot pedal is supported but sold separately.
What metals can it weld?
TIG: aluminum, ultra-thin stainless steel, titanium, carbon steel, alloy steel, and copper. Stick: thick plate, carbon steel, low-alloy steel, and cast iron.
Can it weld aluminum with AC Pulse TIG?
Yes. AC Pulse TIG cleans the aluminum oxide layer while pulsing controls heat input, so you can weld aluminum sheet and thin plate up to about 250A without burn-through — no separate spool gun, no MIG wire needed.
What is Synergic one-knob mode?
Synergic mode auto-matches current, gas flow, and pulse settings to one dial. You set the amperage and the machine handles the rest — ideal for first-time TIG users learning to lay clean beads.
What pulse parameters can I adjust in manual mode?
Up/down slope, initial current, background current, pulse width, pulse frequency, and pilot arc current — full control for pro-level aluminum, stainless, and titanium work.
What is SPOT welding mode?
SPOT mode welds timed tack points with adjustable spot time — useful for positioning thin sheet, tacking panels before a full weld, and battery tabs or similar light work.
Does it really run on 110V household power?
Yes — dual 110V/220V input. On 110V the maximum output is reduced, which is fine for most home-garage work; plug into 220V for full 250A output.
What is the difference between AC and DC TIG?
AC TIG is required for aluminum (it cleans the oxide layer); DC TIG is for steel, stainless, titanium, and copper. This machine does both, plus pulse variants of each.
